Neighbor Friendly Fence Designs
As a homeowner and deciding the right fence style for your property lines shared with neighbors, I recommend choosing a neighbor friendly fence design. What is a neighbor friendly fence design? A neighbor friendly fence design provides the same look on both sides without adding additional materials to have the same look. For instance, a dog-eared wood fence usually has 2 or 3 2×4 rails on one side and the pickets (slats) are on the other side. On the property line with this fence style, one property owner is getting the good looking side of the fence which is the picket side and the other property owner is getting the ugly side of the fence with the 2×4 rails which is the rail side. Yes you can alternate the fence sections so each property owner will be getting a good side of the fence every 8’ on center but this does not keep a consistent uniformed neighbor friendly fence design along the property line. See the picture below to know what a typical dog-eared alternating section fence looks like.
Now selecting a neighbor friendly fence design can be sometimes difficult because these fence types typically cost more than a dog-eared wood fence but usually have virtues such as low-maintenance: no painting or staining, product warranty, resistant to insect damage and won’t warp, rot, or splinter. The following fences are known as neighbor friendly fence designs without modifying the original design: Trex fencing a wood composite (www.TrexFencing.com), SimTek Fence a simulated rock wall (www.SimTekFence.com), vinyl fence a poly vinyl chloride, Ornamental fence a manufactured galvanized powder coated product (www.FortressFence.com), or Jerith an aluminum alloy product. (www.Jerith.com), and depending on the style of wood fence there are options for a neighbor friendly fence design.
Not known as neighbor friendly fence designs without modifying the original design: Fiberon Fence, TimberTech Fence, Nature Composites, Moisture Shield, WoodShades, Veranda, cedar wood.